Home > Product > Fermentor > In-situ Sterilizable Fermentor (

fermentor manufacturer

)

BioLite 5L-40L

	BioLite 5L-40L

	The BioLite in situ ste-rilizable fermentor system is a lab scale fermentor and designed for ease of use. The thermal heater is installed in the jacket of the fermentor vessel and not only the heater controls the temperature in the vessel but also it raises the temperature up to the sterilization temperature that it does not need the additional autoclave system. As this system is designed in the spirit of plant system that the result from this system can be directly applied to the mass production scheme. This system can be used to develop new products in the laboratory of the university or venture company. The result of the mock product can be applied in the BioLite pilot system directly which is manufactured by Biotron Inc. as this system uses the same integrated control board at the pilot and plant scale fermentor system.

Feature & Benefits

It is very easy to operate, wash and make maintenance as it has the open frame structure and uses stainless steel(SUS316) plate.
The built-in type heater makes to be self-sterilization procedures.
The pH, DO, temperature and rotation speed of the agitator are measured and controlled by the integrated controller system.
The temperature of the vessel is measured by the RTD (Pt-100) and controlled by the digital PID control algorithm.
The 150W DC servo motor is installed on the top of the head plate and the carbon-tungsten carbide mechanical seal protects the agitation system from the contamination.
The rotation speed of the agitator is controlled from 50 rpm to 1,000 rpm.
The air driven diaphragm style valve protects from contamination and easy to wash and make maintenance.

Vessel

The stainless steel(SUS316) is used to prevent contamination and rust.
The water jacket system is adopted for precise temperature control.
The sight glass makes to monitor the status of the media.
The redundant ports are installed on the head plate that the auxiliary sensors can be installed.
The sensor ports are installed in the circumferential direction on the lower side of the vessel.

Specification

Agitation	Drive	DC motor,AC Geard motor Top drive(mechanical seal driving)
	Range	50~1000 prm ± 1 rpm
	Sensor	Magnetic hall sensor
	Impellers	Rushton turbine impeller(SUS316L) Foam breaker(SUS316L)
	Control	Microprocessor based PID
Materials & Finish	Vessel	Using 316L stainless steel it is polished mechanicaly and/or electrically
	Piping	316L stainless steel prevent contamination and is polished by electrically
	O-rings/Gaskets	Viton or silicons material is used for the O-ring and the EPDM is used for gasket
Sterilization	Built-in heater makers the the in-situ sterilizion for the vessel, head plate, filter, aeration pipe lines and etc.in 105°C~130°C temperature range automatically
Temperature	Range(°C)	From 3°C above the cooling water temperture to 80°C(accuracy ±0.1°C)
	Sensor	RTD(Pt-100)
	Control	The built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the kacket
Aeration	Sparger	Ring sparger(SUS 316L)
	Intel Filter	The cartridge type sterilizable pleated type 0.2μm absolute filter specifications(option item)
	Out Filter	The same as intel filter specification(option item)
	Control Range	Different vessel size and/or ordered specifications
Pressure Control	The back pressure is controlled manually and/or automatically
Control Unit	Panel	8.5" Graphic Color LCD, Membrane keypad
	Communications	Memory stick, printer, computer, bioG-α and etc. with the RS-232C communications protocol.
	Controller Board	MC68EC020 microprocessor based integrated contrller board is adopted to measure, controland display the fermentation system
Power Supply	220V 50/60Hz single phase, 380V 50/60Hz Single phase
Data Storage	pH, DO, Pressure, Temperature and Agitation speed